Hedén VLC-1L kit Rod-mount
Hedén VLC-1L VM35 Lens Control System
This Hedén VLC-1 VM35 kit is set up for standalone use on Sony FS5/FS7, or any camera with a third-party LANC controller.
With pre-mounted lens brackets the VM35 motor is easily moved from lens to lens within seconds, without tools. The bracket for mounting on 15 mm rods gives further options. The VLC-1L with adjustable top speed, override function and ramping make it an ideal tool for smooth and precise operation in high, or low, speeds.
The VLC - Versatile Lens Control system - for any camera
The new Hedén lens control system was developed with the user in mind.
We created a flexible system to meet new demands and the same system can be used to control either zoom, focus or iris. The 99 position top speed limit is easily adjustable from the hand grip or on the controller in order to optimize both creeping slow zoom or very quick movements, with precise control.
The motor override function lets the operator manually move the lens by hand in parallel with motor control without losing calibration. The system works stand alone on any camera with 3:rd party LANC controller or integrated with the Smartgrip on Sony™ FS5/FS7/FS7II by LANC protocol. Flexible controller positioning allows for good weight distribution.
Silent, low weight and flexible. Adjustable torque, speed and of course with automatic calibration.
The controller power cable has a DTAP connector. If V-lock batteries are used there is normally D-tap out available.
If you are using the cameras internal battery, we can recommend the following batteries:
- LANC in
- Standard 7 pin motor connection
- Standard 2 pin power connection
- Size: 85 x 54 x 26mm / 3.34" x 2.12" x 1.02"
- Weight 140g / 5oz
- CE marked and FCC compliant
Hedén VLC-1L kit Sony FS5/7 Fujinon™ MK includes:
- Hedén VM35-256 motor 256-3.3k
- Hedén VLC-1L Mk1 LANC controller[MK1]
- VM35 15mm Rodmount
- P-tap Power cable
- VLC MK1 Split cable stand alone
- Dualloc recloseable fastener
- Quick guide manual
Hedén VM35-256 motor
A digital zoom or focus motor that mounts on the lens. We created a small, light, very powerful and fast digital zoom motor where we kept the esthetics and quality of our legendary M26T zoom motor.
- Diameter: 20mm / 0.79”
- Length: 78mm / 3.07” (including gear)
- Weight (including gear and cable): 120g / 4.23oz
- Integrated cable 48cm / 18.9" with standard 7 pin connector
- Aluminum with anodized surface treatment
The bracket is designed to be attached to 15mm rods, we also have tailored lens brackets for specific lenses. Currently we offer the following brackets:
- VM35 MK Single Zoom Bracket - Zoom on Fujinon MK 18-55 and MK 50-135
- VM35 MK Zoom Focus Bracket - Double bracket for Zoom and Focus on Fujinon MK 18-55 and MK 50-135
- VM35 XK Single Zoom Bracket - Zoom on Fujinon XK 20-120