Hedén CARAT Kit with M26VE-256

CARAT

The CARAT system is a complete focus and iris control system for professional film and broadcasting cameras. Wireless transmission up to 500 meters (1640 feet) line of sight via Bluetooth. Very small and light weight and with incredibly intuitive controls. Smooth rotary movements of the control knob give you a haptic connection with total control of the lenses movements. Automatic or manual calibration with the push of a button. Adjustable lens limits for a specific focus range and adjustable knob limits for super fine control. One click camera run lets you start and stop recording from a distance. The control unit also lets you control digital lens motors in Fujinon Cabrio and S6 lenses.

 

Specifications (Transmitter):

  • Length (ex antenna 28mm/1.10” and strap fastener 6,5mm/0.26”): 128mm/5.03”
  • Height (ex control knob): approx. 30mm/1.18” (inkl. control knob):  78mm/3.07”
  • Width: Approx. 81mm/3.18”
  • Weight: Approx. 456gr/16 oz
  • Bluetooth range (Indoors): 15 – 100 meters (50-330 feet) depending on building materials, interference and other obstacles (Line of sight): 500 meters (1650 feet)
  • Power source: 9V

 

Specifications (Reciever):

  • Length (ex antenna 27mm/1.06”): 70mm/2.76”
  • Height: 30,5mm/1.2”
  • Width: 60mm/2.36”
  • Weight: Approx. 158 gr/5.57 oz
  • Bluetooth range (Indoors): Approx. 15 – 100 meters (50-330 feet) depending on building materials, interference and other obstacles (Line of sight): 500 meters (1650 feet)
  • Power source: 14.4V PTAP

 

Specifications (Cables)

Motorcable;

  • 7 pin LEMO compatible male Connectors at both sides.
  • Approximately 60 cm (23.6”) long.

 

 Power cable;

  • LEMO compatible 2 pin male connector to PTAP male at the other side.
  • Approximately 60 cm (23.6”) long.

  
Connectors used in this assembly are not manufactured by LEMO but are made to the same specifications and are LEMO compatible.

The system is delivered in a Hedén carry case containing:

1 x CARAT transmitter
1 x CARAT receiver
1 x Hedén digital servo motor Hedén M26VE
1 x Gear set of four (0.4, 0.5, 0.6 and 0.8 module)
1 x Bracket with 19mm to 15mm (0.75” to 0.59”) reduction insert
2 x White scale rings
1 x Power cable
1 x Motor cable
1 x Hedén neck strap
2 x Rechargeable lithium battery
1 x Battery Charger
 
Article number:CA-120

Price:5 195USD

Excluding VAT
This site uses cookies, by continuing you agree to the use of cookies